Vertical Thermal Oil Heater of Coal /Biomass/Bagasse/Coco Nut/Wood Pellet Fired, Find Details and Price about Industrial Boiler Heater from Vertical Thermal Oil Heater of Coal /Biomass/Bagasse/Coco Nut/Wood Pellet Fired
YLL Series Vertical Organic Heat Transfer Heater
YLL series Vertical organic heat transfer heater have pipe rack structure, assembled with mechanical chain grate; main body have convection and radiation heating surface; radiation heating surface is assembled by two radiation pipe square coil; convection heating surface is assembled by
serpentine radiation pipes.It is increasing heating surface and low down the height of main body,enhancing boiler overload ability.
This model can get less than 320C at under 0.7MPA.it can be used in chemicals, light industries, construction materials, food processing,packing equipment ,plastic goods, rubber industries and so on.
| Boiler Model | YLL-1000MA | YLL-1200MA | YLL-1400MA | YLL-1800MA | YLL-2400MA | |
| Thermal Power | KW | 1000 | 1200 | 1400 | 1800 | 2400 |
| Mkcal/h | 0.8 | 1 | 1.2 | 1.5 | 2 | |
| Working Pressure | Mpa | 0.7 | 0.7 | 0,7 | 0.7 | 0.7 |
| Max Outlet Temperature | ºC | 320 | 320 | 320 | 320 | 320 |
| Inlet Temperature | ºC | 290 | 290 | 290 | 290 | 290 |
| Heat Transfer Medium | Heat Conduction Oil | |||||
| Fuel Application | II,III type bitumite | |||||
| Circulating Oil | m3/h | 100 | 100 | 100 | 160 | 200 |
| Efficiency | % | ≥73 | ||||
Introduction:
Vertical thermal oil boiler is also called biomass thermal boiler is a new product of heat-conducting oil furnace. It can take wood shavings, chips; saw dust, straw, rice straw, peanut shells and other biomass as fuel. Because of fuel saving, environmental protection, and green renewable features, this kind of boiler is widely loved by users. According to the boiler structure can be divided into vertical and horizontal thermal oil furnace.
Remark: This parameter is just for reference, for exact parameter, subject to our drawings.
Boiler FAQs
Q: What different types of boilers are available?
DZL type steam/hot water boiler
SZL type steam /hot water boiler
SHL type steam /hot water boiler
WNS type steam /hot water boiler
SZS type steam /hot water boiler
SZW type steam /hot water boiler
CFB type steam boiler
YLW type thermal oil boiler/heater
YYL(W) type thermal oil boiler/heater
WNS type thermal oil boiler/heater
SZS type thermal oil boiler/heater
SZW type thermal oil boiler/heater
Waste heat recovery boiler
Steam generator
Q: What is a fire tube steam boiler?
A fire tube steam boiler is a boiler where the combustion gases from the burner are channeled through tubes that are surrounded by the fluid to be heated. The boiler body is the pressure vessel and contains the fluid. In most cases, this fluid is water that will circulate for heating purposes or become steam for use in processing.
Each set of tubes through which the combustion gas passes, before making a turn, is considered a “step”. Consequently, a three-step boiler will have three sets of pipes with the outlet located at the rear of the boiler.
Q: What’s advantages of our boiler?
Wide Range of Fuel Type
Applicable for a various of light oil, furnace oil, natural gas, LNG, biogas, coke gas, methanol, biodiesel, etc.
High Thermal Efficiency
New and unique design with high thermal efficiency, which save running cost of buyer
Unique Control System
Unique three-elements control system with PID unit covered PLC, inverters, and HMI to reach high level automatic running of boiler
Q: What is the turndown ratio of our boilers?
our boilers feature turndown ratios of 5:1, means the boiler’s minimum operating load is 20% of the boiler’s full capacity (100% capacity)
Q: How do I choose the right boiler?
Firstly, check the actual steam pressure and consumption required at present, and discuss with management there are extra steam required or not in next five years.
Secondly, confirm the boiler fuel type, then we will provide you an optimal boiler that take all factors in consideration.
Q: How long does an industrial steam boiler last?
The normal service life of a steam boiler is 10 to 20 years, provided that proper care and maintenance routines are applied to the feedwater and interior of the boiler.
When considering steam boiler replacement, the three most important aspects to consider are safety, economy and changing requirements to perform the function for which it is operating.
Q: What services for industrial boilers does our offer?
we offers its customers the following services for industrial steam boiler, thermal oil boiler and waste heat recovery boilers and steam generators:
Customized boiler designs.
Super quality boiler product
Installation and commissioning service
Operators training service
Lifetime maintenance service.
Q: What safety features do steam boiler have?
Boiler shutdown protection due to water level low
Boiler shutdown protection due to continuous water level low
Boiler shutdown protection due to steam pressure high
Safety valve over pressure protection.
Automatic FWP on / off
Q: What is the lead time of our boiler
The subject boiler will be delivered within 60 -90 days based on boiler capacity
Q: What primary components for boilers are there?
The most common accessories are:
Burner
Economizer and condenser
Feed water pump
Thermal deaerator (if necessary)
Chimney
Control panel
Instrument gauges and valves
we supplies all types of complementary equipment for industrial steam boilers, and designs new equipment and tools if they are necessary for the final installation to meet its clients’ expectations.
Q: What are the optional items of boiler for buyer choose from
Steam and feed water flow meter
Periodic blowdown expander (if necessary)
Continuous blowdown expander (if necessary)
Thermal deaerator (if necessary)
Q: What is the supply scope of boiler arranged by buyer
Whole civil works engineering by our design drawing
All connecting piping (steam, feed water piping)
All connecting cables (motor cables, single cables, main power supply cable)
Some connecting valves from feed water pump point
Chimney manufacture on site by our design drawing
Balance flue gas ducting manufacture on site by our design drawing
Thermal deaerator
Q: How does boiler warranty work?
The subject boiler is covered by a twelve months warranty against mechanical and/ or factory defects from date of test-run or 18 months from the date of shipment whichever comes earlier.
we shall repair or replace the components, parts or accessories covered by warranty that had become inoperative within the warranty period but not covered caused by faulty operation from the buyer.
we will provide lifetime service for boiler with cost when its warranty expired.
Q: Who will be fitting my new boiler?
Simply, a local professional boiler installing company will install the subject boiler under our engineer’s instruction and supervision
Q: How long will my installation & commissioning take?
Typically, the whole installation & commissioning work may take 1-4 months based on the subject boiler capacity.
Q: How often should I maintain my boiler?
Overhaul inspection and maintenance: 1-3 month
we will provide detail brochure regarding how and when to do maintenance work during boiler running.
| Business Type: | Manufacturer/Factory, Trading Company | |
| Main Products: | Steam Boiler , Boiler , Coal/Biomass/Oil/Gas Fired Boilers | |
| Registered Capital: | 10000000 RMB | |
| Plant Area: | >2000 square meters | |
| Management System Certification: | ISO 9001, ISO 9000, ISO 20000, QC 080000, GMP, BSCI, BRC, ANSI/ESD, GAP,QSR | |
| Average Lead Time: | Peak Season Lead Time: 1-3 months Off Season Lead Time: one month |
Qingdao Hammer Industries Co., Ltd is engaged in manufacturing and exporting industrial boiler for more than 20years. Such as coal/biomass/oil/gas steam boilers, hot water boilers and thermal oil heaters. Based on such many years experience for manufacturing boilers, Our engineers collected more questions from kinds of our valved domestic and oversea clients, and they improve our boilers day by day. So now Our boilers and accessories can suitable all kind of industrial boilers. Our boiler manufacturer have own ISO9001 qualification system. What′s more, tehy also got SGS certificate, and CE certificate, even ASME certificate. Our boiler lifespan can reach 20 years. We are dedicated to global market. Nowadays, we have exported boilers to more than twenty countries, such as Europe, Middle East, Southeast Asia, and Africa. During the past years, our company is developing quickly and stably at the annual growth speed of 100%. We adhere to the management principles of quot&quality first, customer first and credit-based” Since the establishment of the company and always do our best to satisfy potential needs of our customers.
Qingdao Hammer Industries Co., Ltd is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with an irresistible force.
Qingdao Hammer Industries Co., Ltd is engaged in manufacturing and exporting industrial boiler for more than 20years. Such as coal/biomass/oil/gas steam boilers, hot water boilers and thermal oil heaters. Based on such many years experience for manufacturing boilers, Our engineers collected more questions from kinds of our valved domestic and oversea clients, and they improve our boilers day by day. So now Our boilers and accessories can suitable all kind of industrial boilers. Our boiler manufacturer have own ISO9001 qualification system. What′s more, tehy also got SGS certificate, and CE certificate, even ASME certificate. Our boiler lifespan can reach 20 years. We are dedicated to global market. Nowadays, we have exported boilers to more than twenty countries, such as Europe, Middle East, Southeast Asia, and Africa. During the past years, our company is developing quickly and stably at the annual growth speed of 100%. We adhere to the management principles of quot&quality first, customer first and credit-based” Since the establishment of the company and always do our best to satisfy potential needs of our customers.
Qingdao Hammer Industries Co., Ltd is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with an irresistible force.
| International Commercial Terms(Incoterms): | FOB, CFR, CIF, DAT, FAS, DDP, DAP, CIP, CPT, FCA, EXW |
|---|---|
| Terms of Payment: | LC, T/T, D/P, PayPal, Western Union, Small-amount payment, Money Gram |
| Average Lead Time: | Peak Season Lead Time: 1-3 months, Off Season Lead Time: one month |
| Number of Foreign Trading Staff: | 1~3 People |
| Export Year: | 2018-08-01 |
| Export Percentage: | 41%~50% |
| Main Markets: | South America, Eastern Europe, Southeast Asia, Africa, Mid East |
| Nearest Port: | QINGDAO |
| Import & Export Mode: | Have Own Export License
Export License Number: 02985456 Export Company Name: QINGDAO HAMMER INDUSTRIES CO.,LTD |
| Factory Address: | LIAO LAN TOWN ,PINGDU,QINGDAO ,CHINA |
|---|---|
| R&D Capacity: | OEM, ODM, Own Brand() |
| No. of R&D Staff: | 5-10 People |
| No. of Production Lines: | 2 |
| Annual Output Value: | US$2.5 Million – US$5 Million |
| Ever Annual Output of Main Products: | Product Name Units Produced (Previous Year)
boiler 150 Pieces |
